6
3.2 PAIRING SWITCH
The pairing button has two main functions, allows bluetooth units to pair and in the
start up, erase the bluetooth pairing, which will be explained in detail in the
correspondent section.
The associated LED blinks when the paired headset is under range. A continuous
led blink shows an out of range situation, headset off or not paired device.
3.3 MIC SWITCH
The MIC switch allows to ON/OFF the headset microphone, so that we are able to
speak with other units connected to the same intercom channel.
If the microphone is activated, its associated LED will light up, and on the other hand, if
it is disabled, its associated LED will turn off.
The unit provides a MIC-KILL (turns off the MIC) system, so that when the mic is enabled it is
possible to muted it by the MIC-KILL function of the master station ALTAIR EF-200 or ALTAIR WB-
200/WB-202. This MIC-KILL system is compatible with other intercom systems of the market.
The microphone can always turn on the unit (if it is off), pressing the volume switch (VOLUME +
/ VOLUME -) of the bluetooth handset/hands free. Microphone status (ON / OFF) is not saved in the
unit, when the unit is turned on, the MIC remains on.
NOTE:
In most headsets, you can make a MIC mute by pressing and holding both VOLUME + and
VOLUME - buttons at the same time. Consult the headset manual.
3.4 EAR SWITCH
The EAR switch allows to ON/OFF the headset listen, so that we are able to ear other
units connected to the same intercom channel.
If the EAR is activated, its associated LED will light up, and on the other hand, if it is
disabled, its associated LED will turn off.
3.5 ANTENNA
The bluetooth base station has an antenna connector ANT., to mount the antenna supplied
with the equipment.
It is important to place the unit in upper area, to avoid interference and the antenna can
radiate in open space.
3.6 PAIRING THE BLUETOOTH BASE STATION
In the pairing process between two bluetooth units, this units should not be
connected with another bluetooth device at that moment, so unplug all connections
bluetooth devices, prior to their pairing.
ALTAIR Unit EB-200 remains visible to other bluetooth units while not connected to
another bluetooth device, in which case it will remain invisible.
The most common pairing is with a bluetooth headphones or a bluetooth hands free unit, in
which case we set the unit you want to match the bluetooth base station in pairing mode, follow the
instructions manual of the bluetooth headset/hands free unit to configure it this mode (in most
headset and hands free bluetooth, pairing mode is set by press and hold the power button until it
flashes between red and blue).
Once the bluetooth headset or hands free is in pairing mode, we will press and hold the
pairing button until the LED associated with the switch flashes quickly. If the process has worked,
BLUETOOTH BASE STATION, E-200 SERIES INTERCOM SYSTEM
(38 pagine)
(22 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale