Altair WBP-200 Guida alla Risoluzione dei Problemi Pagina 1

WBP-210SINGLE CHANNEL WIRELESS BELTPACKWB-200 SERIES WIRELESS INTERCOM SYSTEMOWNERS MANUAL ISSUE 29J10

10lock the keys configured in the keyboard lock configuration (see section 3.6.10) TOP Panel, FRONTpanel or all. The keyboard lock can be enabled via

11If we pressed key REGISTER again the function will be reset. The beltpack registration can be made through the menu, in witch we select thebase stat

123.8 SELECT SWITCHThis switch , in normal mode, enables/disables the buzzer soundwhen the unit receives a call and when the user press a key.Whenever

134.1 AUXILIARY BATTERYThe wireless beltpack has a battery holder to place analkaline battery, Ni-MH battery 2500 mA/h or lithium batteryof AA size, w

146. TROUBLESHOOTING GUIDEWHEN:POSSIBLE CAUSES AND SOLUTIONS1) Abnormal low range. a) With the beltpacks on, switch off the base station, wait for 30

157. BATTERY CHARGER ALTAIR WBPC-210The battery charger ALTAIR WBPC-210 allows tocharge up to four beltpacks ALTAIR WBP-210simultaneously. The charge

167.3 BELTPACK BATTERY CHARGEThe battery charger ALTAIR WBPC-210 has four connectors to allow the charge up to fourwireless beltpacks at the same time

178. TECHNICAL SPECIFICATIONSPREAMPLIFIERMICROPHONE TYPE:• Dynamic or electret.INPUT IMPEDANCE:• 4K7.NOMINAL LEVEL:• -45 dBu.PHANTOM VOLTAGE:• +9 VDC

189. WARRANTY This unit is warranted by Equipos Europeos Electrónicos to the original user, against flaws inthe manufacturing and in the materials, f

19WBP-210 SINGLE CHANNEL WIRELESS BELTPACKEuropean Union Waste Electronics Information Unión Europea Información sobre residuos electrónicos W

21. INTRODUCTION...

31. INTRODUCTIONCongratulations on your purchase of the ALTAIR single channel wireless beltpack WBP-210 ofthe WB-200 series wireless intercom system.

42. SWITCHES, CONTROLS, ADJUSTMENTS AND CONNECTORSSwitches, controls, adjustments and connectors that you can find in your ALTAIR intercombeltpack. Th

53. OPERATIONThe WB-200 series intercom system are designed to allow maximum easy communicationsoperation between the different control areas in music

63.2 MIC ON/OFF/PUSH TO TALK SWITCH (TALK)The MIC switch allows to enable/disable themicrophone, so that we are able to speak with otherunits connecte

7with the wireless beltpack that is calling at this time (if the call is from the base station does notindicate any number associated), if the vibrato

8If the microphone phantom power is enabled, this icon: appears near to themicrophone icon .When using electret type mics, MIC level must be set to ar

93.6.7 CHANGING THE BELTPACK NAMEWith the Name MENU, the user can change the beltpackname that appears on the display , under thebeltpack registration